Mesoscale modelling HARMONIE

Under construction

HIRLAM Chemical branch & Enviro-HIRLAM online integrated NWP-ACTM model

HIRLAM Chemical branch & Enviro-HIRLAM online integrated NWP-ACTM model

This site introduces the HIRLAM Chemical branch, organised according to the decision of HIRLAM-A and ACTM teams of the HIRLAM consortium (see some documentation attached below), and the Enviro-HIRLAM online integrated NWP-ACTM model, considered as a baseline system for the HIRLAM Chemical branch.

The strategy of integration of the HIRLAM NWP and ACTM within the HIRLAM consortium is described in HIRLAM newsletter, 53 (Baklanov, 2008) and the current version of the Enviro-HIRLAM model - in HIRLAM newsletter, 54 (Korsholm et al., 2008).

The Enviro-HIRLAM 10-years development history:

• 1999: Started at DMI as an unfunded initiative

• Used previous experience of Novosibirsk scientific school and SMHI (A. Ekman PhD)

• 2001: Online passive multi-tracer pollutant transport and deposition in HIRLAM-Tracer (Chenevez, Baklanov, Sørensen)

• 2003: Aerosol and chemistry model tested first as 0D module in offline CAC (Gross, Baklanov)

• 2004: Test of different formulations for advection of tracers incl. cloud water (K.Lindberg)

• 2005: Urbanisation of the model (funded by FP5 FUMAPEX) (Baklanov, Mahura, Peterson)

• 2005: COGCI grant for PhD study of aerosol feedbacks in Enviro-HIRLAM (Korsholm)

• 2006: Test of CISL scheme in Enviro-HIRLAM (Lauritzen, Lindberg)

• 2007: First version of Enviro-HIRLAM for pollen studies (Mahura, Korsholm, Baklanov, Rasmussen)

• 2008: New economical chemical solver NWP-Chem (Gross)

• 2008: First version of Enviro-HIRLAM with indirect aerosol feedbacks (U.Korsholm PhD)

• 2008: Testing new advection schemes in Enviro-HIRLAM (UC: E. Kaas, A.Christensen, B.Sørensen, J.R.Nielsen)

• 2008: Decision to build HIRLAM Chemical Branch (HCB) with Enviro-HIRLAM as baseline system, Enviro-HIRLAM becomes an international project

• 2009: Integrated version of Enviro-HIRLAM based on reference version 7.2 and HCB start (currently there are several versions of the model code)

Some relevant publications:

Baklanov A., 2008: Integrated Meteorological and Atmospheric Chemical Transport Modeling: Perspectives and Strategy for HIRLAM/HARMONIE. HIRLAM Newsletter, 53: 68-78.

Korsholm U.S., A. Baklanov, A. Gross, A. Mahura, B.H. Sass, E. Kaas, 2008: Online coupled chemical weather forecasting based on HIRLAM – overview and prospective of Enviro-HIRLAM. HIRLAM Newsletter, 54: 151-169.

Korsholm U. (2009) Integrated modeling of aerosol indirect effects - develoment and application of a chemical weather model. PhD thesis University of Copenhagen and DMI.

Baklanov A., U. Korsholm, A. Mahura, C. Petersen, A. Gross, 2008: ENVIRO-HIRLAM: on-line coupled modelling of urban meteorology and air pollution. Advances in Science and Research, 2, 41-46

Korsholm, U.S., A. Baklanov, A. Gross, J.H. Sørensen (2009) On the importance of the meteorological coupling interval in dispersion modeling during ETEX-1, Atmospheric Environment, DOI:10.1016/j.atmosenv.2008.11.017 (available at ScienceDirect?)

Chenevez, J., Baklanov, A. and Sorensen, J. H., 2004. Pollutant transport scheme s integrated in a numerical weather prediction model: model description and verification results. Meteorological Applications, 11, 265-275.

Baklanov A., Sorensen, H., J., 2001: Deposition parameterisation in ACT models, Physics and Chemistry of the Earth, vol. 26, No. 10, 787-799
Lindberg, K. 2004: Using different formulations for the advection of tracers in DMI-HIRLAM. In 2 parts. DMI tech. reports No. 04-21 and 04-22.

Kaas, E., 2008: A simple and efficient locally mass conserving semi-Lagrangian transport scheme. Tellus, 60A, 305-320

Gross, A. and A. Baklanov, (2004) Modelling the influence of dimethyl sulphid on the aerosol production in the marine boundary layer, International Journal of Environment and Pollution. 22: 51-71.

Baklanov, A., P. Mestayer, A. Clappier, S. Zilitinkevich, S. Joffre, A. Mahura, N.W. Nielsen, (2008) Towards improving the simulation of meteorological fields in urban areas through updated/advanced surface fluxes description. Atmospheric Chemistry and Physics, 8: 523-543.

Mahura, A., Petersen, C., Baklanov, A., Amstrup, B., Korsholm, U.S., Sattler, K. 2008: Verification of long-term DMI–HIRLAM NWP model runs using urbanization and building effect parameterization modules, HIRLAM Newsletter, 53: 50-60.

Baklanov, A. and U. Korsholm: 2007: On-line integrated meteorological and chemical transport modelling: advantages and prospective. In: ITM 2007: Air Pollution Modelling and its Application, pp. 21-34.

WMO-COST, 2007: Overview of Existing Integrated (off-line and on-line) Mesoscale Meteorological and Chemical Transport Modelling Systems in Europe, WMO GAW Report No. 177, Joint Report of COST Action 728 and GURME, 107 pp. Available from: http://www.cost728.org

COST-NetFAM, 2008: Integrated systems of meso-meteorological and chemical transport models, Materials of the COST-728/NetFAM workshop, DMI, Copenhagen, 21-23 May 2007, 183 pp. Available from: http://www.cost728.org[[BR]]

Attachments